离子色谱法测定护发和皂类产品中羟乙磷酸及其盐类

研究并建立了护发和皂类产品中羟乙磷酸及其盐类的离子色谱测定方法。将护发和皂类样品分散于3mmol/L盐酸中,于振荡器上振摇至完全溶解,护发和皂类样品提取液分别调节pH值至2.5和5.5,依次过尼龙滤膜和OnGuardⅡRP固相萃取柱。滤液采用离子色谱-抑制电导检测法分析测定,以IonPac AS11-HC阴离子交换色谱柱分离,40mmol/L氢氧化钾溶液为淋洗液等度洗脱,ASRS-400阴离子型抑制电导检测,外标法定量。方法的线性范围为0.5～8.0mg/L,相关系数为0.9999,对羟乙磷酸的定量限为0.025%,护发产品在低、中、高3种加标水平的回收率为84.0%～93.5%,相对标准偏差为1.3%～3.0%;皂类产品在低、中、高3种加标水平的回收率为81.4%～92.3%,相对标准偏差为1.8%～5.1%。该法准确、简便、快速,可用于护发和皂类产品的实际检测。     

Multiple Regulation Effects of Ammonium Acetate on ZnO Growth Process in Chemical Bath Deposition

Chemical bath deposition method has been used to synthesize a variety of ZnO morphology structures. However, the specificity and interaction of acetate and ammonium ions with ZnO crystal during the growth process remain elusive. This study contributes to understand the roles of ammonium acetate on the growth mechanism of ZnO in Zn(NO₃)₂-HMTA system. The growth process indicates that the nucleation experienced Zn²⁺-layered basic zinc salts (LBZs)-ZnO process, while the self-assembled unit changed from urchin-shaped, rod-shaped to a fully coupled twin-shaped structure with increasing ammonium acetate concentration. Ammonium acetate dominates the growth process by combing the ligand-ligand interaction of acetate ions binding to the same Zn-rich (0001) polar surface and ammonium ions regulating hexamethylenetetramine (HMTA) hydrolysis. Relatively regular hexagonal wurtzite structure and a dissolve-renucleation-regrowth process which retains the twin-shaped template and renucleates at the same position are observed at ∼10 mM ammonium acetate. Photoelectrochemistry (PEC) measurements show that the uniform hexagonal ZnO rods (Y-10, the sample named as Y-x (x represents x mM ammonium acetate, herein, x is 10 mM)) have a maximum photocurrent density of 1.54 mA cm⁻² at 1.23 V (vs. RHE), much higher than that of the dumbbell-shaped ZnO rods (Y-50, 0.20 mA cm⁻²) at the same voltage. These results provide a further explanation of morphology regulation mechanisms on ZnO synthesis processes and pave the road for more practical applications.     

Turbulence modelling and role of compressibility on oil spilling from a damaged double hull tank

The viscosity plays an important role, and a multiphase solver is necessary to numerically simulate the oil spilling from a damaged double hull tank (DHT). However, it is uncertain whether turbulence modelling is necessary, which turbulence model is suitable; and what the role of compressibility of the fluids is. This paper presents experimental and numerical investigations to address these issues for various cases representing different scenarios of the oil spilling, including grounding and collision. In the numerical investigations, various approaches to model the turbulence, including the large eddy simulation (LES), direct numerical simulation and the Reynolds average Navier–Stokes equation (RANS) with different turbulence models, are employed. Based on the investigations, it is suggested that the effective Reynolds numbers corresponding to both oil outflow and water inflow shall be considered when classifying the significance of the turbulence and selecting the appropriate turbulence models. This is confirmed by new lab tests considering the axial offset between the internal and the external holes on two hulls of the DHT. The investigations conclude for numerically simulating oil spilling from a damaged DHT that when the effective Re is smaller the RANS approaches should not be used and LES modelling should be employed; while when the effective Reynolds numbers is large, the RANS models may be used as they can give similar results to LES in terms of the height of the mixture in the ballast tank and discharge but costing much less CPU time. The investigation on the role of the compressibility of the fluid reveals that the compressibility of the fluid may be considerable in a small temporal‐spatial scale but plays an insignificant role on macroscopic process of the oil spilling. Copyright © 2016 John Wiley & Sons, Ltd.     

Trends of Atmospheric CCl 3 F,CCl 2 F 2 and CCl 2 FCClF 2 in Shanghai (China)

Atmospheric concentrations of CCl 3 F (CFC-11), CCl 2 F 2 (CFC-12), and CCl 2 FCClF 2 (CFC-113) in troposphere in Shanghai, China (31°1N) have been routinely monitored by using gas chromatography with electron capture detector from November 1997 to December 2000. The observation shows that there is a slowly declining trend of the three compounds. On the other hand, a comparison has been drawn between the concentrations observed and the ones calculated by 2-box model on the basis of the global statistical data of CFCs production and emission. Our observation agrees with the calculations. It shows that production and emission of chlorofluorocarbons (CFCs) in China are still at a low level and gradually decreasing.     

Distribution of arsenic species in environmental samples collected in Northern Chile

Gradient ion chromatographic separation coupled with ICP-MS was used to resolve and determine the most common arsenic species in environmental and biological samples of carrots, trout, soil, sediment and river water from Region II of Chile. The carrot and trout samples showed a concentration of 49 and 168 µg g^?1, respectively, of total As. Both concentrations are high considering the basal level. In the carrots, percentage of 45 and 31% of total As were found for As(III) and As(V) species, respectively. In the trout, the higher concentration related to AsB at 39% of the total As. As(III) and DMA were also present in relatively high concentrations. The River Loa and the soil in which the carrots are growing also present very high As(V) concentrations of 100 and 17 µg g^?1, respectively. The ratio between the concentration for the same As species found in the living organisms (carrots and trout) and the environment in which they grow (soil and water) can provide important information about the possible absorption or biotransformation of As species in living beings. As(III) and DMA are the species in which the greatest accumulation occurs with respect to the medium in which they are present, and biotransformation also appears to take place.     

Fast analysis of triterpenoids in Ganoderma lucidum spores by ultra‐performance liquid chromatography coupled with triple quadrupole mass spectrometry

A rapid and reliable method was established for simultaneous determination of main triterpenoids in Ganoderma lucidum spores using ultra‐high‐performance liquid chromatography coupled with triple quadrupole mass spectrometry (UPLC‐TQ‐MS). The established method was validated in terms of linearity, sensitivity, precision, accuracy and stability, and was successfully applied to determine the contents of 10 main triterpenoids in different batches of G. lucidum spores. The analysis results showed that moderate levels of triterpenoids were found in G. lucidum spores. In addition, a MS full scan with a daughter ion scan experiment was performed to identify the potential derivatives of triterpenoids present in G. lucidum spores. As a result, a total of 22 triterpenoids from different G. lucidum spores were unequivocally or tentatively identified via comparisons with authentic standards and literatures. This method provides both qualitative and quantitative results without the need for repetitive UPLC‐MS analyses, thereby increasing efficiency and productivity, making it suitable for high‐throughput applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐catalyzed selective decarboxylative coupling reaction versus direct C―H arylation for arylation of heteroaromatics

Conditions for selective palladium‐catalyzed decarboxylative 2‐arylation of 3‐substituted thiophene and furan derivatives bearing an ester at C2 position have been established. By using 2 mol% phosphine‐free Pd(OAc)₂ as the catalyst and a mixture of KOH and K₂CO₃ as the bases, in dimethylacetamide, moderate to good yields of the desired 2‐arylated products were obtained. A range of functional groups such as nitrile, nitro, formyl or acetyl on the aryl bromides was tolerated. This method allows us to employ in some cases more convenient reactants in terms of cost or physical properties (boiling point) for arylations. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐catalyzed Suzuki–Miyaura coupling with aryl and heteroaryl bromides using N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (1) combined with PdCl₂ affords an efficient catalytic system for Suzuki cross‐coupling of aryl and heteroaryl bromides. A high turnover number of 750 000 is obtained with the catalyst loading as low as 1 ppm. This catalyst system exhibits good stability and longevity. In this study, a broad scope of substrates is investigated and satisfactory yields are obtained. Copyright © 2012 John Wiley & Sons, Ltd.